PNG → STL
Image to STL: logos, stamps and reliefs
Turn a picture into something you can print. Logo mode raises the dark (or light) parts of a logo or drawing on a base plate — perfect for signs, name plates, keychains and stamps (tick Mirror). Photo relief mode turns the shades of a photo into heights. Set the size, base and relief height, preview in 3D and download an STL or 3MF.
Private: your files never leave your device.
Logos, drawings, signatures and photos. Transparent PNGs work too — transparent areas stay flat.
How to use Image to STL relief
Step 1: Drop a logo, drawing or photo (transparent PNGs work too).
Step 2: Choose logo or photo relief, which parts to raise, and the size.
Step 3: Press “Create 3D model”, check the preview and download the STL or 3MF.
Frequently asked questions
What pictures work best?
High-contrast logos and drawings, ideally black on white or a transparent PNG. Remove a photo’s background first for a clean relief.
How do I make a rubber-stamp style print?
Use Logo mode, raise the dark areas and tick Mirror, so the print reads correctly when stamped.
Can I print it in two colours?
Yes — add a filament change (pause) at the layer where the base ends; your slicer shows that height.
Is my image uploaded?
No. The model is generated on your device.